1-Fuel Injectors are Supplied with  EV 1  Plug and Play Harness Adapters

2-Fuel Injectors measure 60mm O Ring to O Ring  With 11mm top

3-Flow Rate is calculated at 43.5psi Fuel Pressure

4- No Cutting of wires or soldering

5- No Need for inj Drivers or Resistor pack

6- High Pressure capability up to 100psi Fuel Pressure Flow will increase approx 50% with GOOD atomization

7-Injectopr will run 90% to 95% Duty Cycle up to 9000 RPM